"Folded Horn" Phone Stand

prusaprinters

<p>This stand will not only hold your phone, but also make the speakers sound a little bit better! There are no batteries to charge and no <i>“bluetooth pairing"</i> steps required. I use this at my workbench because sometimes I'm too lazy to use an external speaker. It makes whatever sound you're playing just a little bit louder and beefier.</p><p>I was inspired by prior designs by <a href="https://www.thingiverse.com/thing:1191352">Fab_ster</a> + <a href="https://www.instructables.com/Folded-horn-passive-phone-speaker/">mxx</a> + <a href="https://www.printables.com/model/14251-passive-speaker-folded-horn-phone-iphone5">Lemmesky</a> :)</p><p>I created this folded horn passive speaker from scratch. This design:</p><ul><li>Has speaker holes on both sides to accomodate a wider variety of devices</li><li>You can choose to split the model for a nifty MMU effect or just print in one material</li><li>Optimized for 0.6mm nozzle @ 0.30mm layers, but should print fine with a 0.4mm nozzle @ 0.30mm layers</li><li>Requires three M3 screws (anything 8mm or longer will do) and three hex nuts</li></ul><p>I have uploaded multiple versions of the Body piece to accommodate:</p><ul><li>Phones measuring up to 74mm wide by 12mm deep</li><li>Larger phones measuring up to 82mm wide by 12mm deep</li></ul><h4><strong>Instructions</strong></h4><ol><li>If you wish to print MMU, split the models</li><li>Print the Lid piece <strong>with</strong> supports for where the screws sit</li><li>Print the Body piece <strong>without</strong> supports</li><li>Assemble with three M3 screws and three hex nuts</li><li>Stick your phone on top!</li></ol>