Folding DJI OSMO Stand

thingiverse

I decided I wanted a folding version that I didn't need to assemble each time I used it. I used the upper portion of the stand by Rcfiddy1 and remodeled the bottom from scratch. Here is a timelapse of the print:https://www.youtube.com/watch?v=RBuMif7BCYs Print Settings Printer Brand: LulzBot Printer: TAZ 5 Rafts: No Supports: No Resolution: .3mm layers Infill: 30% Post-Printing The leg hinge pins are made from 3 short segments of 3mm filament. The holes are purposefully tight and you may need to tap the filament segments into place. After you get the 3 pieces in each leg, trim them flush with an xacto knife as seen in the photos. Addendum: User DaveMoi Came up with a printable pin set for the legs for those of you who do not use 3mm filament. His thing can be accessed here: https://www.thingiverse.com/thing:2259434 Addendum 2: User Lee2009 did a make of this and used bolts instead of the 3 pins.https://www.thingiverse.com/make:488290 However, I might suggest instead of plain bolts, you also use a steel or brass tube in the leg pieces so that the threads of the bolt do not chew at the leg plastic when opening and closing. The great thing about this build is that you can adjust the leg friction so the legs don't fold down when you lift the Osmo with the tripod. He also notes that it also fits the Osmo Mobile 2.