Folger Tech Delta Rod Jig

thingiverse

The rod jig from justinledwards combines 6 rods into 1 jig. This can allow the rods to be different lengths. I cut it down to 1 wide to be used one rod at a time to make them more exact. Bolt it onto 20x20 extrusion with the final length wanted . The shape for the rod end was also for Traxxas ends which are a different shape than the one provided in the Folger Tech kit. I modified the shape to fit these. Recommended to use thing 1218870 to cut the carbon fiber rod. Just use the posted STL. bolt in into a length of 20x20 extrusion with the wanted length measure between the thin slots. Push a razor blade into the slot and twist the tube with a drill. Works perfectly. To use the jig, glue one end into the rod and let it set up. Then glue the other end and quickly push it into the jig to set up. You will end up with a set of exactly the same rods if done correctly. Enjoy!