Food dehydrator tray extension for 275 mm (10.8 in) or 330 mm (13 in) dehydrators

prusaprinters

<p>Tray extension for non-branded food dehydrators which are 275 mm (10.8 in) or 330 mm (13 in) in diameter, so that they can be used to dry filament. <strong>Please note that I have not tested the sizing of any of the 330 mm parts as I do not own a food dehydrator that size.</strong> Please let me know via comment or message if you have problems with these pieces.</p> <p>It is split into quarters. One version has an M5 hole which you can screw a Bowden adapter into, another is solid, and the third has a space to mount a temperature and humidity gauge, <strong>which is also untested as I do not own one.</strong> Separate mounting pieces for the gauge are available for both sizes.</p> <p>For the gauge reference I have used one with a 25 x 45 mm mounting hole such as this: <a href="https://www.ebay.com.au/itm/2x-LCD-Meter-Temperature-Humidity-Thermometer-Hygrometer-Vivarium-Reptile-BI701/262996361073?epid=20016010829&amp;hash=item3d3bcdff71:g:8YIAAOSwPcBbMQIY">https://www.ebay.com.au/itm/2x-LCD-Meter-Temperature-Humidity-Thermometer-Hygrometer-Vivarium-Reptile-BI701/262996361073?epid=20016010829&amp;hash=item3d3bcdff71:g:8YIAAOSwPcBbMQIY</a></p> <p>This version won't stack. If there is demand for a stacking version I can make one at a later time.</p> <p>I recommend printing them with PETG or ABS in order to withstand high temperatures without deforming. However, these pieces are fairly thick and may hold up well if PLA is used.</p> <p>If you're looking for a spool holder to use in your dehydrator, you can try this one that I made: <a href="https://www.prusaprinters.org/prints/20325-vash-vertical-axis-spool-holder">https://www.prusaprinters.org/prints/20325-vash-vertical-axis-spool-holder</a></p> <h3>Print instructions</h3><p>Brim highly recommended. No supports needed. High temp filament (e.g. ABS, PETG) recommended.</p> <p>Parts shown printed in ABS at 0.20 layer height, 20% gyroid infill, and 4 perimeters.</p>