Flying Bear Ghost 5 Thermal Camera

thingiverse

This is a thermal camera for a Flying Bear Ghost 5 3D printer. This project includes: + DWG files for acrylic/plexiglass cut + Printed parts you will need to assemble the camera + STEP files for your modifications. #### This project is designed to use 5 mm plexiglass. If you plan to use different thickness, you should modify printed parts. ### You will need: 1. Pre-cutted plexiglass panels (front, back, left, right, top, bottom door, top door). You'll find DWG files in the archive. There are two versions of a back panel: one should be used with the printed cable pads and the other is without cable pad holes. 2. Printed parts: + top-panel-bracket **x4** + hinge-bottom-door **x2** + hinge-top-door **x2** + *(optional)* cable-pad **x2** - should be printed with TPU/Flex + door-magnetic-lock-1 **x3** + door-magnetic-lock-2 **x3** - designed to use with 15x8x2 magnets + *(optional)* door-lock-1 **x3** + *(optional)* door-lock-2 **x3** + *(optional)* door-lock-3 **x3** - if you don't want to use magnets + screen-cover-1 **x1** + screen-cover-2 **x1** + screen-cover-hinge-1 **x2** + screen-cover-hinge-2 **x2** + screen-cover-hinge-3 **x2** 3. M3x12 screws **x21**, M3x8 screws **x8** and M3 nuts **x29** 4. M4x12 screws **x53**, M4x16 screws **x16** and M4 nuts **x69** 5. Glue gun, screwdriver Bottom door and top door hinges were taken from [this](https://www.thingiverse.com/thing:4804593/) project. Many thanks to the author! Have fun! Please press a **LIKE** button if you find this project useful!