Form-fitting stackable batterie-crates with europallet for storing batteries (AA, AAA, 9V and others)

prusaprinters

<p>Because I liked the battery crates from <a href="https://www.printables.com/de/model/173788-customizable-stackable-beer-crate-for-all-types-of">https://www.printables.com/de/model/173788-customizable-stackable-beer-crate-for-all-types-of</a> a lot but wished for a couple of modifications, I started redesigning them.</p><p>My redesigne includes:</p><ul><li>Realisation of the scale 1:5.5</li><li>More solid and easier to print crates by adding 60° bevels to reduce overhang problems</li><li>Adding a ½ europalette, oriented on industrial plastic ½ europalettes, as a main-feature of my assembly</li><li>Form-fitting stackability with a waistband at the top and bottom of the crates and the top of the europalette</li><li>Adding my desert-fox-logo and PLA Recycling symbol</li></ul><p>The prints are tested and optimized for the following parameters:</p><ul><li>0.4 mm nozzle</li><li>0.2 layer height</li><li>13 % gyroid infill</li><li>3 perimeters</li><li>5 bottom and top layers</li><li>PLA</li><li>Support for the crates (supports only on printbed) is needed for the overhangs.</li></ul><p>To assemble the two feets into the europalette you need following additional parts:</p><ul><li>6x M3x16 A2 screws</li></ul><p>Alternatively you could glue it I guess.</p><p>If you are printing one, I would be happy to see a make :-).</p><p>Edit 17.09.2022: I added an europalette-base-version with Ø2.85 mm holes which should come out printed a little bit smaller like Ø2.75 mm to be able to directly screwing the screws into the material. Make sure to have 3 perimeters for a good hold.</p><p>Edit 24.09.2022: I removed the europalette thread-insert version because of redundancy.</p><p>Edit 29.11.2022: Added Information for the needed supports for the crates (supports only on printbed)</p>