FPV camera servo tilt mount for Eachine 250 FPV Racer

thingiverse

These are parts needed to have your FPV camera tilt controlled by a servo on the Eachine 250 FPV Racer. I use it together with a small 3.7g micro servo hooked directly to my RX. I got mine at Banggood. http://www.banggood.com/3_7g-Micro-Mini-Servo-For-RC-Model-p-77696.html If you have a later version (v.5 or later) of the quad, you don't have the battery holder plate. You need to print one of these as well. Or find another place to mount your servo. The battery holder is created by KDan and can be found here. http://www.thingiverse.com/thing:1289398 The new faceplate allows for 6" props to be mounted also. The frame mounts to the camera. The shims replaces the original ones. They are needed to raise the upper deck a little to allow for more clearance. You'll need longer screws to hold the upper deck with the shims. Some M2.5 12 mmm should do it. In order to get a lot of tilt. You will have to remove the unused white connector on the bottom of the camera board. It's not used on the quad. I just used some pliers and removed it. https://www.youtube.com/watch?v=NhiNDtrJnxQ If you use this mod, please post a "Made" photo. It's your way of saying thanks for the design. Print Settings Printer Brand: RepRap Printer: Prusa i3 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 30% or more Notes: No supports are needed except for the faceplate. Pretty easy prints.