FPV Pan Tilt ccd mount

thingiverse

This is a pan tilt mount I designed for a pcb board ccd camera (part number PZ0420) from securitycamera2000. It may work for other pcb ccd's cameras but I cant guarantee it. There is also a slit to fit a velcro strap to attach a mobius action cam on top, there is a printed part included in the files that helps keep it straightened out. It uses 2 servos. I recommend metal gear servos (definitely a must if attaching the mobius) but plastic work as well, these two both fit equally and I currently use the metal gear ones. Hextronik MG-14 (metal gear)http://hobbyking.com/hobbyking/store/__22929__Hextronik_MG_14_14g_2_2kg_0_11sec_aircraft_servo_US_Warehouse_.html HXT900 (plastic gear)http://hobbyking.com/hobbyking/store/__662__HXT900_9g_1_6kg_12sec_Micro_Servo.html It also requires 4 M2x8mm screws and 1 M3x16mm screw. There are slots in the printed files to fit control horns included with the servos. I CA glued these in place with extra thick CA. The axis spacer and tilt joint are placed across the opposite end from the tilt servo and are held in place by the M3 screw. I will probably update this in the future to use a bearing on the pan axis to remove the slight wobble. for now it serves as a simple cheap pan tilt.