FPV Set for PS-240 X-Quad

thingiverse

This is a full set of mounts for the eachine ET200 and the eachine 700tvl cmos-fpv-cam. You get this as a set in different combinations. They are quite cheap at banggood, around 30 to 40 bucks will do. The vtx-mount will fit to eachine ET200, eachine ET200R, eachine ET25 and eachine ET25R. It won't fit to ET600, because of this vtx has a jst-connector at the bottom side. You can mount two diatone LED-Boards (12V, 30x7mm) on the back of the vtx-mount. Use double sided tape or hot glue. The FPV-Camera mount is tilted by 15 degrees and fits to those compact eachine cmos 700tvl and eachine CCD 1000tvl. Use two small zip-ties (3mm) to fix the camera. The zip's are only used on the back side, The holes for the zips leaves room for NTSC/PAL-Switch and JST-connector. Leave a comment, if you need the camera tilted by an other angle. I think that 60 degrees is possible, if you like to do it like mattystuntz. Update 06/13/2016: Added a raised version of the 15 degree cam-mount. You can use a Diatone LED-board (30x7mm, 12V) for a front-light. Print Settings Printer: ctC 3D Printer, Makerbot Dual clone Rafts: No Supports: No Resolution: 0.20mm Infill: 100% Notes: I use PLA