FRHybrid v1.x Frame Cut Files

thingiverse

***NOT FOR COMMERCIAL USE*** FRHybrid v1.x Frame Files Only the latest and greatest cut files will be posted. Old files will be removed. v1.1: Updated front plate 20x20 pattern to accommodate the DJI Vista Canopy 5.5/6" Props Session 5, Hero 7, Hero 8 (w/ Littlefoot plate) Superview: No Props In View, No Cropping Required Front plates come in two flavors, an original and Littlefoot configuration. The orginal front plate was designed for removing the props from view for the Session 5 and Hero 7 in Superview without Hypersmooth cropping. The Littlefoot plates are targeted at the Hero 8 running Superview without Hypersmooth cropping. It should be noted that it may be tough to hit the CG with the Littlefoot plates and smaller 1500/1800 packs. Recommended Plate Thicknesses: - Front Plate: 2mm Twill (requires qty 8 pressnuts) - Rear Plate: 2mm Twill (requires qty 1 pressnut) - Top Plate: 2mm Twill - Front Arm: 6mm Twill - Rear Arm: 6mm Twill Hardware BOM: Description; Qty; Notes 3mm Standoff, Round (5mm OD), 10mm; 2; Front 3mm Standoff, Round (5mm OD), 20mm; 4; Rear 3mm Standoff, Round (5mm OD), 28mm; 2; Cam Uprights 3mm Standoff, Round (5mm OD), 30mm; 2; HD Camera Holder Button Head Screw, M3 x 5; 2; Front Standoffs Button Head Screw, M3 x 8; 18; Standoffs and Cam Holder Button Head Screw, M3 x 12; 9; Arms (may opt to use a single washer at the center clamp fastener in order to ensure stack clearance. 3mm Press Nuts; 9; https://www.mcmaster.com/94100a110 or equivalent 3D Print files: https://www.thingiverse.com/thing:3601947