Friction-Fit Shell-Mount Cyclotron Light Holders for Q-Pack Mk3 and GBFans Pack Light Kit

Friction-Fit Shell-Mount Cyclotron Light Holders for Q-Pack Mk3 and GBFans Pack Light Kit

prusaprinters

<p>This is a shell-mounted holder for the GBFans Cyclotron lights in the GBFans Pack Light Kit. This is designed for the Q-Pack MK3 (<a href="https://github.com/mr-kiou/q-pack">https://github.com/mr-kiou/q-pack</a>).</p><p>Assembly is straight-forward:</p><ol><li>Insert lens into bottom of base</li><li>Insert base into Q-Pack Mk3 Cyclotron hole (backside)</li><li>Install GBFans Cyclotron Light Chip</li><li>Install cap over the chip</li></ol><p>You can then rotate the assembly to your desired orientation and use whatever means you wish to secure the part in its final location (superglue, CA glue, epoxy, etc.). If you do not wish to glue down your cap but still want a more secure fit than the friction fit, the screw holes are made for a standard M3 bolt. It is recommended to use a 10mm or 12mm bolt (8mm can be used but the engagement will be really shallow).</p><p>Different sizes have been created for the base, depending on your lens supplier:</p><ul><li>50.0 mm x 3 mm (JupiterElectronics)</li><li>50.0 mm x 5 mm (GBFans)</li><li>44.5 mm x 5 mm (TacoBelli)</li><li>35.0 mm x 5 mm (BenOfKent)</li></ul>

Download Model from prusaprinters

With this file you will be able to print Friction-Fit Shell-Mount Cyclotron Light Holders for Q-Pack Mk3 and GBFans Pack Light Kit with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Friction-Fit Shell-Mount Cyclotron Light Holders for Q-Pack Mk3 and GBFans Pack Light Kit.