FRONT AND REAR LED COB KIT FOR TRAXXAS REVO, REVO 3.3, E-REVO

cults3d

This time, traxxas revo lighting based on COB LED. The module is borrowed from a flashlight, but also available at: https://pl.aliexpress.com/item/1000008700528.html?%20GatewayAdapt%20=%20glo2pol%20&%20spm%20=%20a2g0o.9042311.0.0.31295c0ftSDsxz The housing is universal, so it can also be used for rear lighting. For construction you will need: LED module, printed parts, 4 small screws, cables, 16 Ohm 2W resistor. (I used 33 Ohm 2w connected in parallel - I had it). I sealed the complex module both inside and the diodes themselves with a colorless silicone. The light, due to the mounting, is not as intense as my second project, but it is very discreet with an almost invisible housing. The lighting is mounted just like my other project under the bumper bracket. Holes in the printed parts must be threaded with an M3 threaded tip and the original M3 screws should be replaced with longer ones. http://ekalk.eu/ledr_en.html Please check my other projects