Front fenders for Propel endeavor pro

thingiverse

Hey all, I just designed and printed front fenders since I was getting wet and dirty all the time just because the roads are wet most of the time where I live even tho it's not raining when I ride my board. The first image shows all the tools you need. Here is the item list: x1 front_fender_1 x1 front_fender_2 x2 M6 85mm bolts x2 M6 nut with washer (I think you can find them as washer nuts, or just use regular nut and washer.) and some tools to mount stuff. Process: 1- Attach the bolts to the front_fender_1 and front_fender_2 and tighten the parts with nuts. 2- Remove the wheel. 3- Remove the black thing as I marked with red circle in picture 8. 4- Attach the short silver bolt as shown in picture 9. 5- Put the things back in their place. 6- Tighten the things up as I showed in picture 10. You might ask someone to help, make sure it is tight enough so it doesn't move when you're riding. 7- I also attach my front lights to that black thing that I don't know what it is for. So you can do the same. They hold up quite good. Note: I don't suggest you to use plastic bolts and nuts. In my first design I did that and they broke in their first contact. I suggest you to print front_fender_1 with 100% infill since I broke one with 25% infill so I switched to 100% and tested them for more than 50km and they hold up well. I am working on the rear fenders however still couldn't find a proper attachment to the board. Got some ideas tho :) Let me know if you have any questions/thoughts. Any donation is appreciated, feel free to contact. My email: sebbayramm@gmail.com