Fully Customizable Pen Holder Fridge Magnet

myminifactory

Today's 3D printable design is a simple, but effective, magnetic pen holder. This design is completely free and shared under a permissive license. Your support is hugely appreciated. Did you know? Some of our designs cannot be found on MyMiniFactory. If you are looking for more, check out our premium projects: https://codeandmake.com/premium OpenSCAD Customizer Options This design has the following Customizer options: General Material_Thickness - The minimum thickness of the material Pen Hole Pen_Hole_Diameter - Diameter of the pen hole Pen_Hole_Depth - Total depth of the pen hole Magnet Holes Magnet_Hole_Diameter - Diameter of the magnet hole Magnet_Hole_Depth - Depth of the magnet hole You will need You also will need: 2x strong magnets, e.g. 10mm x 2mm neodymium magnets Design Considerations To ensure the magnets fit snugly, we recommend making the Magnet_Hole_Diameter slightly smaller than the actual diameter of the magnets. You can then use a blunt implement, such as a flat screw driver, to gradually increase the size of the holes until the magnets can be inserted. To insert a magnet, simply place the magnet on a flat surface, align the magnet with a hole and apply a little downward pressure. Alternatively, you can make the Magnet_Hole_Diameter a little larger and use some strong glue to ensure the magnets remain in place. Material This design is perfect for printing in many filaments, including PLA, PETG and ABS. Versions 1.0 (10 Apr 2021) - Initial version Printing Recommended slicer settings: Resolution: 0.1mm - 0.2mm Infill: ~20% recommended. Supports: Should not be required unless the Magnet_Hole_Diameter is quite large. Rafts: Not required, unless you experience adhesion issues. License The "Pen Holder Fridge Magnet" model (.stl) is licensed under the CC BY license by Code and Make. The "Pen Holder Fridge Magnet" code (.scad) is licensed under The MIT License by Code and Make. We are proud to offer content to you absolutely free. We love to create free content for you. As you might imagine, it takes a lot of time. Supporters help us fund materials and equipment to create future projects and tutorials. To show your appreciation, please use the link below: https://codeandmake.com/support We thank you so much for your support!