Functioning Switchblade

thingiverse

Remixed from: https://www.thingiverse.com/thing:4394741 the original barely worked and you had to file loads of it down. With this remix you can print all the parts with a very high success rate and not have to do any post-processing apart from assembly. (assembly video on original thing: https://www.thingiverse.com/thing:4394741 ) however i recommend 2 loombands or ones at that size PETG works the best, but you can print all of the following parts in PLA successfully: . Top case . Bottom case . Blade . Button Its works better if you print these parts in PETG: . Slider . Springs All parts explained: . Case2: the case on the bottom that houses the blade, slider, springs and top case . Casetop2: top half of the case, goes in-between the button and slider . Slider: holds a rubber band and moves the springs apart for the blade . Comb blade: the blade but with a comb so its practical . Original Blade: pointy blade with sharp edges . Springs: both go inside the triangular gaps in the bottom case . Button2: goes on the slider above the top case Parts that may need changes in the slicer: . Button - you may need to scale this to ~102% if it doesn't fit well