Funnel and Stand for Bialetti Moka Pot
prusaprinters
<p><strong>General</strong></p><p>This is a funnel and stand for the Bialetti Moka Pot. Provided are STLs and OpenSCAD files.</p><p> </p><p><strong>Funnel</strong></p><p>The funnel STL is for the 6 cup moka pot but if the smaller pots have smaller inside diameters, I could easily add them if someone could message me the measurements. The SCAD can be adjusted (update the <code>null</code> on lines 8 or 9 with the correct value).</p><p> </p><p><strong>Stand</strong></p><p>Print the stand in vase mode. If your line width is something besides 0.4mm, you can adjust the line width in the SCAD file to match what you'd like to print at.</p><p>The stand should fit all sizes of filter. When printing the stand, I printed with supports and then pushed them out from the bottom quite easily. I think you should be able to print without supports if you feel confident with bridging on your printer.</p>
With this file you will be able to print Funnel and Stand for Bialetti Moka Pot with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Funnel and Stand for Bialetti Moka Pot.