Galaxy S7 Wireless Charger Powerbank Case

prusaprinters

<p>My son's Galaxy S7 Edge can't be charged via USB anymore due to a defect.<br/> The only way for him to charge it is by wireless/contactless charging</p> <p>This makes charging tedious, especially when he's on the road: He has to carry not only the phone and the power bank, but also the charger with him..</p> <p>I bought one oft these super-cheap Chinese Qi charging pads <a href="https://bit.ly/2CUXp6s">on AliExpress</a>, gutted it and printed a case where I glued in the electronics. You can see the original charger in the photos. There are screws behind the bottom pads...</p> <p>The case fits this charger circuit board on the inside, together with a XIAOMI Power Bank 2 (10,000 mAh).</p> <p>The project is in OpenSCAD. it should be easily adaptable for any other type of smartphone and power bank...</p> <p>One of the files is a Cura project file (the "*.3mf" file). it shows you how I printed the case: position it upright, switch on support (for the clamp tips) and use Cura's "Support Blocker" feature to avoid support on the rest of the case. It's not really needed!</p> <p>Let me know when you've made one.</p> <h3>Print instructions</h3><h3>Category: Mobile Phone Print Settings</h3> <p><strong>Printer Brand:</strong> TEVO</p> <p><strong>Printer:</strong> Tarantula</p> <p><strong>Rafts:</strong> Yes</p> <p><strong>Supports:</strong> Yes</p> <p><strong>Resolution:</strong> 0.2mm</p> <p><strong>Infill:</strong> 20% - 30%</p> <p><strong>Filament:</strong> Janbex PLA black<br/> <strong>Notes:</strong></p> <p>One of the files is a Cura project file (the "*.3mf" file). it shows you how I printed the case: position it upright, switch on support (for the clamp tips) and use Cura's "Support Blocker" feature to avoid support on the rest of the case. It's not really needed!</p> <p>You can print with as little as 20% infill and a shell size of 1mm.</p>