Game Boy Advance SP Pocket Shell

prusaprinters

<p>I wanted a shell for my Gameboy Advance SP that didn't have a hinge. Inspired by the Gameboy Pocket, I designed the GPA SP Pocket Shell. This shell is built around all original hardware, so no electronic mods are required. However, I wanted to replace some of the parts in my GPA SP which led the design to be a bit odd:</p><ol><li>I do not like the standard tri-wing screws found in Nintendo products and started to strip them with repeated use, so in my build I purchased replacement Philips head screws.</li><li>I also ordered replacement button membranes, but they didn't fit in the shell properly even though the OEM ones fit just fine. So I would recommend original button membranes.</li><li>Lastly, I wanted a glass screen lens, and it was slightly different than the original (this is why there are TWO shell front parts). On a stock GBA SP the screen is slightly off centered, so If you have an original screen lens, use the off centered file. However, if you get a new screen lens, check to see if it is centered, and if so use the centered front shell file.</li><li>The button extenders are REQUIRED. The buttons and shell will not work without them.</li></ol><p>I do not have a build tutorial, but if that is something you want let me know and I can work on making one.</p><p>I am aware that there is no light diffuser for the power LEDs. In my prototype I glued a small piece of natural/clear PLA in the hole and that worked well, but I no longer have that PLA so I cannot currently design one.</p><p>I have also decided to make this a CC Non-commercial design. I have spent many hours designing and printing dozens of variations to get this shell functional. If you would like a shell but do not have access to a 3D printer, contact me so I can make one for you. If you love the design and feel encouraged to, I accept tips through PayPal, but do not feel obligated to give.</p><p>https://www.paypal.com/paypalme/brettkpennington</p><p>My email: Brett3DP@gmail.com</p>