Gaming Handheld Stand Remix

prusaprinters

<p>In was in need of a stand for my new Ayn Odin gaming handheld, and really liked the look of the design made by “Xomm".&nbsp;</p><p>I wanted a basic charging stand that would sit on my bedside table, so I have changed the base to remove the cavity that was meant to house the USB hub and instead replaced it with a channel to fit the stock Ayn Odin USB-C charging cable. I did not want the cable to be able to get pulled back into the stand's base, so have added a small “cable lock” which can be inserted into the base once the cable has been passed through it. Although I designed the dimensions around the Ayn Odin cable, I think any other USB-C cable will fit just fine.&nbsp;</p><p>I have also made the stands base shorter, due to it not needing to fit a USB hub anymore. The nice curve on the front of the base which was included by the original designer didn't look very good anymore once I changed the base dimensions, so I touched it up to suit.&nbsp;</p><p>Prints very easily on my Prusa MK3S+ when using a 30mm brim and supports. I did have a failed print due to some supports not touching the build plate and falling over during the print, so make sure the supports have some contact with not only the print, but the build plate too. I used 0.15mm layer height with low infill (15%) and the print come out great, taking roughly 24 hours to complete.&nbsp;</p><p>Thanks again Xomm for your work!</p><p>Original Design Link - <a href="https://www.printables.com/model/152227-gaming-handheld-stand">Gaming Handheld Stand by xomm | Download free STL model | Printables.com</a></p>