Garden tap hose adaptor 1/2" to 3/4"
thingiverse
The thread adaptor on my garden tap to the hosepipe split just as I turned on the tap and completely sprayed me with water. I would be happy to pay £2-3 for a replacement but I knew that there are various threads, so I measured and Googled what I needed. With this information on hand, I decided to design my own 3D printed adaptor. I tried various shapes but settled on this because it can be printed (thread to hot plate) with no support. I also made sure that my nozzle temperature was turned up by about 10 degrees to ensure that the filament layers were properly fused. Finally, the 3.5mm x 21mm rubber washer was retreived from the split adaptor to provide a good water seal.
With this file you will be able to print Garden tap hose adaptor 1/2" to 3/4" with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Garden tap hose adaptor 1/2" to 3/4".