Gardena Micro Drip 4.6mm Hose Clamp for Wall Attachment

thingiverse

Hello all, since there seems to be no actual solution to attaching a Gardena Micro Drip type 4.6mm tube/hose to a wall, I used my limited abilities to design simple clamp. You can use two 3 mm screws to attach the clamp to a wall. The diameter is about 6.2mm -> that's about the actual outer diameter of the smaller Micro Drip tubing. I use this clamp to attach the small tubing to a wooden fence to water herbs which are mounted on a rack. The holes for the woodscrews are not designed in a drop shape on purpose: The corner of the drop shaped hole should point up when printing. Compared to "usual 3d-printed holes" his prevents semi-solid filament from dripping into the hole resulting in annoying postprocessing. Outer dimensions are 8mm x 30mm. The holes are 3.3mm. I printed it 100% solid with PETG at 0.15mm layer height. Best regards, Hannes PS: at a consumption of just about 60cm for 1.75mm filament, this little clamp is perfect for chewing up the last few pieces of leftover material.