Garmin Zumo 660 Sunshade
prusaprinters
<p>No more hassle with rubber bands, velcro, tape or clamps to attach the sunshade to the zumo. Install once and it's ready for the whole season. A recess is provided to open the back without disassembly. The power button is also easily accessible.</p><p>The sunshade fits like a glove on the zumo and uses the slightly beveled edge to prevent it from sliding off. Use a (stainless steel) M4x18 mm bolt and a locknut to secure in place.</p><ul><li>Extends 48 mm (1.9") from top of Zumo screen.</li><li>Tested on cobblestone roads and approved.</li></ul><h4> </h4><h4>Print Instructions</h4><p>Layer height: 0.2 mm</p><p>No support</p><p>Infill: 20%</p><p>Filament: ASA (UV light resistant), PETG</p><p> </p><p>**Edit: by request: I've added the fusion 360 and the step-file.</p><p> </p>
With this file you will be able to print Garmin Zumo 660 Sunshade with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Garmin Zumo 660 Sunshade.