Garud-500 Drone

grabcad

Garud-500 is a simple 3D Printed DIY Drone Design kit, specially developed for enthusiasts who want to build their very custom drone using 3D Printing. This Garud-500 can be 3D printed in commonly used PLA or ABS material and can be assembled without any hassles. The main frame board i.e. Top & Bottom Plate are designed to bear excessive forces during acrobatic flights while the arms are designed with landing gears to reduce additional connecting weight & prevent damage during landing.Garud-500 can be 3d Printed with below print specifications:- Layer Height: 200 - 300 Microns- Infill: 30% (50% for more strength)- Infill Pattern: Rectilinear- Shell Thickness: 0.8mm - 1.2mm- No Support required- Rafts Enabled- Temperature - 210 C PLA | 230 C ABSBill of materials :4 x Arms (3D Printed)1 x Top Plate (3D Printed)1 x Bottom Plate (3D Printed)16 x M5 Screws16 x M5 Nuts4 x Brushless Motors (2206 - 3600 Series | 700KV - 1200 KV)4 x ESC’s (30A - 40A)4 x Propellers (8045 | 9050 | 9060 | 1045 | 1050)1 x Flight Controller (Naze 32 | Open CC3D | APM 2.7 | Pixhawk | DJI Naza V2)1 x Lipo Battery (2200mah - 5000mah | 3S - 4S)1 x Radio Controller (Taranis | Flysky Fs-i6)