Gear Cube - Fidget (100% printable)

prusaprinters

<p><strong>The small &amp; big version are 100% printable</strong></p><p><strong>alternative:</strong> 4x &nbsp;608ZZ ball bearings (8mm x 22mm x 7mm) for the <strong>BigVersion</strong></p><p><strong>Needed To Print:</strong></p><ul><li>4x Gear</li><li>4x screw</li><li>1x CenterCube</li></ul><p><strong>Printsettings [Screw]:</strong></p><ul><li>Infill 50%</li><li>Layerhight: &lt; 0.1mm</li><li>3 Walls</li><li><strong>XY size compensation: -0,2mm (printer tolerance)</strong></li></ul><p><strong>Printsettings [Gear &amp; CenterCube]:</strong></p><ul><li>Infill 15%</li><li>Layerhight: 0.2mm</li><li>3 Walls</li></ul><p><strong>Printtimes ~ 60mm/s:</strong></p><ul><li>Small version: 1h 30min</li><li>Big version: 4h</li></ul><p><strong>Assembly tips:</strong></p><ul><li>Pretap the holes with a M6/M8 Screw on the CenterCube</li><li>Take an M6/M8 nut and screw it onto the screw&nbsp;</li><li>if do not fit at all, lower the XY size compensation Settings</li></ul><p><strong>Changelog:</strong></p><ul><li>Change the tolerances of the gear</li><li>Fix CenterCube with the Shifted hole</li><li>Added GearV2 Without bearings</li><li>Added a Small 100% printable Version</li></ul>