Geeetech A10 - Holder for Touchscreen and Raspberry Pi (Klipperscreen)

thingiverse

Together with the "Case for 5inch Waveshare DSI Touchscreen" https://www.thingiverse.com/thing:6153863 this is an additional holder for a Raspberry Pi (2/3/4) The Raspi is mounted on a tray and can easily be removed from the holder without any tools. Mount the Raspi with four 20mm standoffs (M3 or M2.5) on the PiTray. Mount the PiCover (Raspi 2+3-> PiCover.stl, Raspi 4-> Pi4Cover.stl) with four M3x5 mm screws and washers Connect the ribbon cable from the LCD to the raspi and slide the tray into the holder. Push the latch into the two holes to fix the tray onto the holder. I have drilled out the holes on the Raspi to fit M3 because I use M3 standoffs. <b>Edit:</b> Added a cover for the Raspi 4. It's based on a CAD Model of a Raspi 4, not on an actual Raspi 4. So I'm not sure if it is 100% accurate. <b>Additional parts needed:</b> 4x M4x12 Socket Head Bolt 6x M4 Washer 4x M4 T-Nut 2x M4x10 socket head bolt 4x M3x5 mm Socket Head Bolt 4x M3 Washer 4x 20mm Standoff for Raspberry Pi Tray 2x M4x6x6 Heat Set Inserts 1x 15-20 cm long 15 Pin DSI Cable to connect the Pi With the Screen