Geeetech Rostock G2 GS2 M301 Delta Reinforcement

thingiverse

These are reinforcement supports for the Geeetech Delta Printer series. This will help to reinforce the Delta Printer. These parts also include some insert for some led strip. For the bottom section you will need to print 3 items. They mount on the parallel vertical axis rod. It also includes some hole for 6x10 mm and 6x6 mm set screw to improve on the reinforcement if needed. On the top section 2 files are included: One part have an insert for a wire support mount https://www.thingiverse.com/thing:2842540. You will need to print 3 items of your choice. They mount from one axis to the other. They are 4 mounting hole in the center of the original hole on the top plate that used 4x50 mm screws. Also included 2 mounting holes 6x50 mm screw Note: these hole need to be drilled on the top plate to be install. They are also some hole for some 6x10 mm set screw if needed. Each support have insert for some led strip. 6 led for each bottom et 2x 3 led for each top. Recommendation replaces all of the 4x9x1mm washer for the vertical rod with 4x16x1 mm washer on the top and bottom mounting plate. This parts are very hard to install they are a tight fit. Your printer will be more stable. Connecting the Led: Bottom: You need to go to the pcb Fan0. Top: Power from one of the old stepper fan. Parts List: 24x M6x6 Setscrew Cup Point Hex Socket Brass (If Needed). 32x M6x10 Setscrew Cup Point Hex Socket Brass (If Needed). 12x M4x50 Screw Hex Socket Cap. 24x M4 Washer. 12x M4 NutLock. 6x M6x50 Screw Hex Socket Cap (If Needed). 12x M6 Washer (If Needed). 6x M6 NutLock (If Needed). 12x M4x16x1 Washer. 1X Led Strip 36 led. Shop Material: Wire, Swrink Tube, other. Belt Mount: https://www.thingiverse.com/thing:2837786 Tools: 6mm Dril. 6mm Tap for the Setscrew. Shop Tools: Rubber Malette, Woodblock, Drill, other.