GEM Single Edge Safety Razor "Triceratops"

thingiverse

This is a GEM style SE razor appropriately named "Triceratops". Andreas from https://razors.click named it Triceratops for its protruding blade. This lightweight razor is very easy to maneuver, and its somewhat aggressive level provides a bss shave with little effort. It is very easy to print and doesn't need supports. For best results, print at .1 layer height. To load, insert blade from behind the head with handle halfway out. Align side tabs on the razor head with notches on the blade and hold in place while tightening the handle. Please post your makes. Enjoy PLEASE NOTE: GEM style blades are specifically made for shaving. They are identical to the common single edge cutter blade you'll find at the hardware store. Hardware store blades are NOT for shaving. This is a very easy to print SE razor that uses GEM blades. It prints without supports. For best results, print at .1 layer height. Because not all printers are calibrated the same, some post-processing may be required. If the blade has any play when the handle is all the way in, it may be necessary to file or sand the bottom of the razor head to allow the handle to make better contact with the blade. 11/16/2020 UPDATE: I've uploaded the files for SLA printing. The only difference is that most of the sharp corners are now rounded. 11/20/2020 UPDATE: Added another for SLA printing. File "Min_GEM_SLA_with_supports.stl" includes razor head and handle at their optimal angle and supports.