Genshin Impact - Ayato Katana

cults3d

This model is designed for Kamisato Ayato cosplay from Genshin Impact. It is cut into 14 pieces to fit in Ender 3 with platform of 200mm x 200mm x 200mm. There is an uncut version included just in case you need it. For the file name, you can refer to the picture in the preview section with file name labelled to the pieces respectively. All the pieces come with flat face that can lay on the printing bed easily. There is no hanging part for all the pieces except pieces 2a, 2b, 3a and 3b. There will be a tiny bit of support needed for the pattern on the surface of the handguard. Once printed, glue pieces a and b back to back using PLA glue or superglue to form a part. Do the same for the other pair then join all the part together. If you need to add in a bone, you can drill some hole on the connecting faces and bridge them with a iron rod of 2mm- 3mm in diameter. However, it is not a must as the total length of the prop is around 117cm only. It should be quite light if you print with a low infill. For scaling, please use the same scale for all the pieces. Cheers and happy printing! ====UPDATE==== 31st March 2022 Removing previous version. Update on the misplacement of pattern on handguard/tsuba. Blade is now thinner for a sharper look. Re-cut the model in a way that is easier to join in post process.