Genshin Impact - Favonius Lance

cults3d

This model is cut into 14 pieces, 12pieces for the spearhead and 2 for the pummel, to fit in my Ender 3 with platform size of 200mm x 200mm x 200mm. You can refer to the picture with pieces labelled to their file names respectively in the preview section to get the files you want to print. There is a uncut spearhead and pummel included as well just in case you need it. All the pieces are cut with easy printing in mind. Pieces come with flat face that can lay on the printing bed easily. However, if you wish to reduce the "staircase " artifacts on the surface, you can print it vertically, but will result in longer printing time and more support used. Tunnel that punch through the model is 10mm in diameter and 5mm for the tunnel located around the spearhead. It can be used to assist you in aligning the pieces and for bone installation. If you can't find anything to fit the tunnel, files included "peg" and "peg4.5" can be used instead. "Peg" is a cylinder with 9.5mm diameter whereas "peg4.5" is 4.5mm diameter. If you are confident with the precise diameter of your prints, you can ignore the 0.5mm threshold and scale it to 10mm and 5mm too. Once printed, glue both pieces a and b together to form a part. Repeat the same for the other pairs and join all the parts together. To bridge the spearhead and the pummel, you can use a 25mm pole. If you can't find any, you can print the "pole" file included. It is 180mm in length. You can print multiple copies to achieve the total length you want.