Genshin Impact - Staff of Homa

cults3d

This model come with 4 main parts, 3 sub parts for the spearhead and 1 sub part for the pummel. This model come with 12 files in total. 10 files for the spearhead and 2 files for the pummel. There is a picture attach with the file name label to their parts respectively, you can refer to that. For pummel and lower part of the spearhead (part 1), there is a housing for stick with 25mm diameter. If you need it in different size, just inbox me on Twitter, so that I can custom for you, but not larger than 25mm. If you wonder why 25mm is used, that's because the broom I can find in my home is around 25mm. Please ask your mom first if it can be remove or else just get one from your neighbor =P There is no easier way to print this model as there is some hanging parts and 'organic' shape on this model. Therefore, support is needed during this printing process. If you wish to do the cutting yourself, just inbox me for the non cut file. You are advised to use bones when combining the parts of spearhead as it is quite tall. You can do it by drilling some hole between the connection face and glue in some aluminum rods or wooden sticks. For scaling, please scale all the part with the same scale factor and axis so that it can be combine perfectly once printed out. Cheers! Hope you guys like it. ====UPDATE==== 12th September 2022 1. Default thickness is thinner for a slicker look. 2. Model is cut in an easier to print method. 3. Add tunnels (5mm and 10mm in diameter) to the model for alignment and bone installation purpose. 4. Add peg files for alignment using the tunnels, pole file for bridging the head and pommel. -"peg"- a cylinder with 9.5mm diameter -"peg 4.5"- a cylinder with 4.5mm diameter -"pole" - a 25mm diameter cylinder with 10mm tunnel pass through (default length -180mm) *peg and pole files are optional to print if you have your own material to align pieces and bridge the head and pommel. 3.Uncut version included *V1 is kept in an included zip file