GGT150 FPV & LED front mount

thingiverse

Hi, check out my other designs at https://www.thingiverse.com/BuiltBrokenGlued/designs *Parts are linked* Order: Idea Description *Idea:* I've gotten into FPV and discovered the 25mw camera I had fitted on my [RC tank](https://www.thingiverse.com/thing:3068121) wasn't powerful enough, so I got the [Eachine TX02](https://www.banggood.com/Eachine-TX02-Super-Mini-AIO-5_8G-40CH-200mW-VTX-600TVL-14-Cmos-FPV-Camera-p-1088368.html?rmmds=search&cur_warehouse=CN) camera to put on my quad frame. I usually fly LOS and I'm used to having an LED on the front showing direction, similar to my [Grasshopper frame](https://www.thingiverse.com/thing:2810593). *Description:* I've made this for a [GGT150](https://www.banggood.com/GGT150-160mm-2_5mm-Arm-Thickness-Carbon-Fiber-Frame-Kit-for-Multirotor-p-1176551.html?rmmds=search&cur_warehouse=CN) 160mm carbon frame. This camera allows fitting of a [Eachine TX02](https://www.banggood.com/Eachine-TX02-Super-Mini-AIO-5_8G-40CH-200mW-VTX-600TVL-14-Cmos-FPV-Camera-p-1088368.html?rmmds=search&cur_warehouse=CN) 200mw camera to the front of the GGT150 frame. The angle is set at 22.5d facing up. If requested, I can change the angle and add it here. The bottom of the mount has a space for a [2x2 WS2812 LED](https://www.banggood.com/3Pcs-CJMCU-4-Bit-WS2812-5050-RGB-LED-Driver-Development-Board-p-985782.html?rmmds=search&cur_warehouse=CN) that runs off the LED on the Flight Controller to show forward location by line of sight. This is a slide-down bracket fitted when the top plate is removed. The cutout in the top plate allows the aerial to stick above without touching carbon. I'm using a 30x30 4in1 and a F4 flight controller with an X6B RC, and it's a tight fit but everything fits. The camera is powered by a BEC directly from the battery going through a JST connector. I can fly LOS without having to have the camera connected. There are two files: one with a base and air gap, and one with no base.