Ghostbusters leg hose connector

thingiverse

Ghostbusters Leg Hose Connector ========================== This is not supposed to be movie accurate, rather my interpretation of a practical leg hose connector. I didn't like seeing the stitching, so have hidden it under the body, giving it a neater look to the bystander, even if this is less "authentic" to those trying for movie copy. Features ------------ - Safe friction fit hose, if hose is snagged it will break free from connector - Inner hose support, a internal support is provided for the exiting tube to help prevent it collapsing under its own weight and kinking, making it look better - Two part screw together design allows stiches to be hidden - Recessed thread channels allows thread to flow from one hole to another securely and avoid thread tearing when screwing on - 3D printer tolerance applied to threads allow the model to be 3D printed and screw together tightly - Body length is on the shorter side of the designs I've seen, to stop it protruding too much, thus reducing leverage so it hangs better, pulling the material less. - Plenty of stitching holes placed near the edge of the circle, to make a neat interface with the material, less gap between the body and fabric - Unscrew for washing, reducing risk of damage to costume or connector during laundry as you don't have a big clunky piece of plastic to snag. Printing ---------- Requires supports everywhere when printing. I used support roof and floor, 0.3mm z support distance, 10% support density and zig zag infill for easy separation in threads of support material. 25% infill with 3 outer layers. Use part cooling fan. After printing carefully remove all the support from the threads and clean any rough spots. Should easily screw together. Note ------ Due to the nature of the costume, there is always a risk of snagging, trip or falls. Please risk assess your costume and I cannot accept any responsibility for this part in use.