Ghostbusters Trap Pedal - K&V 903 Bullet Latch

prusaprinters

<p>UPDATE - 02.27.2021</p> <p>Added version 2 with the insert protruding more as it was on the original pedals. I also added a separated version so you could choose your own position.</p> <p>**Note, the fitting might be a bit tight as I had to push the limits of the thickness for the casing wall so it would print. You may need to slightly sand the insert depending on tolerances.</p> <p>...</p> <p>While working on my Ghostbusters trap from Countspatula, I came across a thread on the GBFans forum that was discussing the trap pedals. One of the things being discussed was the round greebile on the back of the trap.</p> <p>The Countspatula plans call for an acorn nut and while that is a reasonable stand in, I wanted something more accurate. Unfortunately as a Canadian it was difficult to find the proper latch for a reasonable price, so I decided to model my own.</p> <p>The original is apparently a Knape and Vogt 903 3/8 Inch Diameter Drive-In Ball Cabinet Catch.</p> <p>With the help of the GBFans members, I was able to get accurate measurements to model a version that I feel is fairly accurate.</p> <p>I've provided two versions. One a full solid version and a half version so the hole in the trap based doesn't need to be drilled as far and can be printed flat.</p> <p>Head over to Countspatula's page for more Ghostbusters trap downloads.</p> <p><a href="https://www.thingiverse.com/thing:1394639">https://www.thingiverse.com/thing:1394639</a></p> Category: Props