Gimbal Stick - Hero Session to GoPro adapter

thingiverse

I bought a gimbal stick for an action camera without reading the description properly. When it arrived it turns out it supports gopro hero style action cams, but not a hero 5 session which is what I happened to be using. After looking at the provided attach point where the camera is supposed to go into the gimbal, I figured out that the holes at the top was exactly 50mm apart . - measure if your gimbal stick is 50mm apart. Mine was labeled Hohem iSteadyPro so I don't know if this adapter would fit on other models. The frame to put the session into has an Inner rectangle of 38mm and an outer one of 44mm. which means the frame is 3mm thick on all 4 sides. You need an 2x M2 bolt and nut (about 15mm-20mm should be idea) - I happen to have some longer ones handy. Note - I used PETG for this as some flexibility is needed to push the session camera in. With PLA, I suspect you may need to file down the sides a little or it will be a tight squeeze.