Gineer: CremaBot v2.2.0.7 Enclosure

thingiverse

This model is the protective casing for Gineer R&D's innovative CremaBot. CremaBot is a cutting-edge project that turns a Standard Jura Impressa XF50 Classic coffee machine into an Internet of Things (IoT) device, enabling seamless control from any web-enabled platform. The precise cut-outs in the top section of the casing line up perfectly with the CremaBot v2.2.0.7 circuit board, allowing all necessary interface cables, end stops, and external power sources to be routed through with ease. A specialized 4-pin header directly connects to the stepper motor driver if installed. For a detailed exploration of this project, visit: http://gineer.co.za/Projects/CremaBot or watch the tutorial video on YouTube at https://youtu.be/qJ30F3_xPHo. Printing and Assembly This enclosure was printed in two separate pieces without requiring any support materials. By utilizing a soldering iron to heat up four M3 metal nuts for hex screws, you can securely fasten these parts together with ease, creating a sturdy assembly that meets all the requirements for this cutting-edge CremaBot system.