Gingery Lathe Parts

thingiverse

After printing out alot of the parts from the gingery lathe thing from sprocket1597, I saw that alot of the parts were missing, so I started designing the parts in freecad so I could get all of the parts to build the full lathe. Im still missing the tailstock assembly and such, but Ill add those when I get to that point. This one contains the missing compound swivel, compound slide, headstock, and the leadscrew bearings for the side of the lathe body. The STL files are exact size and ready to print. For anyone who's trying to print the files from sprocket1597, you need to either turn the size from metric to imperial and vice versa for the size to be right. In kisslicer, there's an option under "all models" called "inches -> mm", or you can set the size ratio to 25.4 or 2540%. Edit: There has been a slight error in the headstock, and the new version has been uploaded now. If you have already printed the old version, I added the file Pads_fix_headstock, just glue those to the bottom of the headstock and they'll be fixed then. The error was that the bottom of the headstock where the mounts and slide grips were, it was short 1/16th of an inch, so I just updated it and added a fix for whoever had already printed the part so you dont have to reprint it again.