Glove Box Ports

cults3d

You can use these bolt-in ports to create a DIY glove box /still air box for your needs. I use these to inoculate growing medium for gourmet mushrooms but there are so many uses. Print two of the exterior ring and two of the interior rings. I used the exterior ring as a template for the holes then cut them out with a jigsaw. I held the ports in place and drilled the holes with a 3mm drill bit. I used 12 M3 socket head bolts and nuts to secure these in place, inside I sealed the port to the container with plenty of silicone sealant. Find some long gloves on amazon (use elbow length, longer gloves than i did in the pic) secure the gloves to the inside ring with a little glue and some zip ties.