Gmade R1 Portal 7 & 13 Degrees C-Hubs

prusaprinters

<p><strong> This is a printable version of the alum. 7-degree C-Hub that Gmade sells as an upgrade</strong><br/> <strong> I have made a 13 degrees version too now, since 7 is not alot..</strong></p> <p>V2 Files are now corrected and should be fine to print.<br/> Tolerances around the outer edge are corrected (Was a problem in previous version).<br/> If you print it in Nylon, PETG, ABS, it should be plenty strong.</p> <p>Your choice of 7 or 13 degrees :</p> <ul> <li>Complete Left and Right</li> <li>Split Top/Bottom Left and Right (No supports)</li> <li><ul> <li>(Glue the parts together after the print)</li> </ul> </li> <li><p>Or the newer and better WrHubs !<br/> <strong> UPDATE 2019</strong> : I found the "Wrapters" which allow the use Axial AR60 cHubs/knuckles/universals for more steering throw. After 4 of them broke in not even a day (weak where you screw the cHubs into the adapter) i decided to remove that weak part entirely, effectively making a "WrHub". Cut the shafts to the same length, use the same tube for shimming as in the Wrapters instructions. 1 Additional 5x8x2.5 bearing needed per side (2 total) (same as those already in the portal box).</p> </li> </ul> <h3>Print instructions</h3><p>Category: R/C Vehicles</p>