Godox TT350 Camera Flash Adapters

thingiverse

Camera flash adapters for a Godox TT350 flash and a Profoto Dome Diffuser. These may still be useful without using a Profoto Dome Diffuser, which press-fits into the end of each adapter, as you can instead place diffusion gel over the end instead. Each flash adapter has a twist-lock fit with detent inside the female adapter that is press-fit onto the flash head. I recommend printing the female flange mount upside-down (circular opening on print bed) so that the detent in the twist-lock is printed without the need of supports. I would also recommend using a 0.12 to 0.16 layer height since the detent only extend a fraction of a millimetre into the track and for a smoother detent feel the smaller layer heights will help. The male adapter for the Profoto Dome can be printed with bigger layer heights, I used either 0.16 or 0.20. You may need to file a small amount around the four nubs that are used for the locking mechanism to ensure a smooth fit but they often work just fine without any filing too. The male adapters can mostly be printed without supports. The shorter curved adapter should be printed with the widest orifice seated on the print bed, in which case you may need minor supports for the inner lip that the Profoto Dome diffuser seats against.