Good Samaritan tunings

thingiverse

Tuning parts for excellent Good Samaritan prop: - Bullet split to the actual bullet and threads for easier printing to get the bullet bottom corner sharp. - Alignment piece for gluing BackFrame_Split1 and BackFrame_Split2. If I had thought this even a nanosecond before printing and preparing the parts, I would have modified the actual parts to have in-built alignment tab (ditto for trigger guard). - Alignment pieces for gluing trigger guard. - HandlePlate also split to several parts, _internal and _external for faster and easier print, tab, torus and top for allowing a separate ring (torus) or a real (metal) ring. - Barrel_alignment_piece for aligning the gluing of barrel parts to be used inside the barrel and can be drawn out after gluing. - Hammer_1_rotated.stl to print the external hammer part in upright position. - Stopper for 2.5 mm piano wire. - Gun_Rack splitted to 3 parts for easier/faster printing. With 3 mm holes for the plate mounting - Multimaterial version of Gun_Rack2. With 3 mm holes for the plate mounting - hammerlock_tune_ugly.stl for a beefier hammer lock (see assembly updates below) with a counterpart to prevent the lock to lean towards trigger during trigger pull. The slot between parts is on purpose with zero tolerance in order to be able to sand it to tight fit thus not requiring glue. Insert counterpart after installing the the trigger piano wire. - cylinder spacers. I managed to find 5x11x4 bearings for the cylinder so needs a spacer on the front end. 1mm and 1.2 mm thick to see which one fits better. 2021-02-10 got the springs so started assembly and of course the hammerlock broke. Slightly tuned hammer lock added, beefier spring hook base, smoother hole. 2021-02-12 the cylinder bearings have been in customs for 2 weeks now. Hammer mechanism requires some tinkering, it has a habit of jamming. 2021-03-15 received the missing parts and assembled. hammerlock_tune_ugly.stl works perfectly