Google Nest/Home Mini Wall-Mount

thingiverse

Google Nest/Home mini or JBL CLIP3 wall-mount I tried multiple types of Google Nest/Home mini Wall-mount but they are not enough simple or robust to put them on the ceilling so I made the simpler and more robust wall mount - easy to build, easy to print, avoid sudden drop, fit for multiple Nest/Home mini's AC adaptor for multi-national models. Other requirment - This model requires 2 M3 screws to make safer mount on the wall and ceiling. - Optionally add rubber slip guard on each top in side of "Top mount" as option Installation steps 1. Put Google Nest/Home mini AC adaptor into "Base" unit. 2. Wrap the cable around the inner circle of "Base" unit. 3. Put "Top mount" unit on "Base" unit and join them w/ two M3 screws. 4. Put tiny rubber slip guard on the top inside of "Top mount" as option 5. Put Google Nest/Home mini or JBL CLIP3 on it and put it on the AC outlet on the wall/ceilling. Enjoy! Note: Please make sure the AC outlet can hold enough to avoid sudden drop and you can add double-sided tape(the gap between google AC adapter and bottom of "Base" is 1.0mm) between the outlet and wall mount. Recommend to add tiny rubber foot on the top inside of "Top mount" in case of rack of hold depending on the tightness of printing. My friends unit drop down after 2 months with PLA 15% fill due to mechanical stress causes open bend.