Google Pixel 2 camera guard

prusaprinters

<p>Thin camera guard for Google Pixel 2.</p> <p>Camera on my phone was starting to show some signs of wear and abuse so I designed this simple guard. Looking better than a full body case and keeps your phone slim and sexy. :-) Guard is only 1 mm thick.</p> <p>Designed to be printed from a flexible fillament. It might be possible to print from PLA or PETG, but not tested.</p> <p>Attach it using a double sided tape. Some thin and strong tape is recommended. If you are brave enough, you could try fixing it with a glue, but at your own risk!</p> <p>I used 2 mm wide tape from ebay: 3M 300LSE Double Sided Tape (cut on reel)</p> <p>Slice the tape like a comb with exacto knife leaving only a thin strip of tape connecting pieces. Then bend it like a snake while sticking it around the perimeter of the guard. Do not rush it, use steady hand, tweezers and a lot of patience.</p> <p>Good luck and share your results.</p> <h3>Print instructions</h3><h3>Category: Mobile Phone Print Settings</h3> <p><strong>Printer Brand:</strong> Prusa</p> <p><strong>Printer:</strong> <a href="http://amzn.to/2rqZ6Uo">i3 MK3</a></p> <p><strong>Rafts:</strong> No</p> <p><strong>Supports:</strong> No</p> <p><strong>Resolution:</strong> 0.15 mm</p> <p><strong>Infill:</strong> 100%</p> <p><strong>Filament:</strong> E3D Premium Flex-PolyEster (Shore 45D) Black<br/> <strong>Notes:</strong></p> <p>When printing from flexible material, take your time and better print slow.</p>