GoPro & Dive Light Underwater Anchor Mount - Connects to Rope

thingiverse

<h3>What's Included?</h3> There are four parts. - 2 pieces that mount to a rope (aka rope mount) - 2 pieces that mount to a dive flashlight (aka light mount) The two rope mount pieces connect together. There is a little cut-out going through the center of the two assembled pieces. This cut-out is intended to guide the rope. Most rope will be too wide to fit in this gap, which is not the intent anyway. <h3>How to Use</h3> Connect the two rope mount pieces around the rope, then use either zip ties or a hose clamp to hold it together. The two light mounts are held together with screws. The light mount then connects to the rope mount with another screw. The GoPro also connects to the rope mount with a screw. The GoPro can be tilted in any direction. For the example images I just happened to point it up towards the surface. <h3>What Screws are Needed?</h3> A variety of screw will probably work fine. I used size 6-32 x 1-1/2" screws and the nuts that were included with it. All screw holes and nut holders are sized to hold a GoPro nut and screw. See images below for measurements.