GoPro Hero 4 Session Frame

thingiverse

This is a frame for the GoPro Hero 4 Session which features 4 holes for M2 Cap Head bolts which allow it to be securely bolted to any of your projects. It can be 3D printed with the flat back of the model on the bed of the printer. If you're using a normal FDM style printer then I recommend using a small nozzle (I used a 0.25mm). Finally, the clamping bolt is also an M2 Cap Head bolt (approx 5mm long). However, to reliably screw it in, you may need to put a thread insert in to the printed part (or modify the hole size to be slightly smaller). I've made the file available for you guys to use and change at will, however it should not be used for commercial gain. Any questions, ask and I'll try and respond every now and then, but I won't be checking often. Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: Doesn't Matter Supports: Yes Resolution: 0.1 Infill: Doesn't really matter Notes: I used a brim, rather than a raft. Also, when printing, use a smaller nozzle for best results (~0.25mm).