Grab bars for the Kindle Fire HD 8 tablet (10th Generation) (2020)

thingiverse

Grab Bars for your Kindle Fire tablet. Finally, with this large tablet case, you can hold onto your tablet. You can hold it with your left hand or right hand or both hands. You can hold it portrait mode or landscape mode. If you have had trouble holding onto your tablet, this case with grab bars is your answer. The tablet will not slip out of your fingers. You will not accidentally touch the screen. Yes, it's large, but what good is a tablet, if you can't hold it? This model is for the Kindle Fire HD 8 tablet (10th Generation) (2020). If you have a Kindle Fire HD 8 tablet (8th Generation) (2018) use this model: https://www.thingiverse.com/thing:5261481 If you have a Kindle Fire HD 10 tablet (11th Generation) (2021) use this model: https://www.thingiverse.com/thing:5261730 To put your tablet in the case, first insert the end of the tablet with the buttons, then work down both sides towards the other end. As you press edges of the tablet, the side walls of the PLA case will expand. Once you get to the end without the buttons, first force one corner of the tablet into the case, then quickly force the remaining corner into the case. During this moment the tablet will flex in an alarming manner, but that flexing doesn't seem to hurt the tablet. Once the tablet is inserted, it is held firmly and will not rattle in the case. If you want to remove the tablet from the case, push from the back side. Start with the end without buttons. Push out one corner, then push out the adjacent corner. With the end free, the tablet will easily come out the rest of the way. This model includes a conical hole that matches the viewing angle of the rear camera. The view should be clear. However, sometimes I notice that one corner of the image is ever so slightly blocked by the plastic case. I've found that this can be corrected by shifting the tablet in the case a fraction of a mm to a spot where the case does not block a corner of the image.