Green Thumb Watering Can

prusaprinters

<p>This is a watering can in the shape of a thumb. It is intended for printing on PETG filament. It has a layer height of .2 mm, an infill of 30%, and Extruder Temperature of 230 C with Bed Temperature of 80 C. The intended print orientation has the bottom of the hand on the build plate so when it is finished the user should be looking at a thumb's up! It is best printed with a raft but a brim can work as well. There is support material needed and the proper support material setting is “with support material touching the buildplate only”. The watering can works by filling the hole located near the fingers with about 10 fl oz. of water. The watering can effectively functions when held by the handle and tilted outward where the water can flow through the opening on the thumb. Happy Printing and Gardening!</p>