GU10 socket + Wood strips base for moon lamp lithophane
prusaprinters
<p>Attention! The moon lamp has to be printed at 80%scale to fit this! I did that because it would not fit on my prusa Mini otherwise.</p><p>Print it from the provided .3mf, I suggest. Use a standard GU10 Socket, solder the wires to a power cord (I don´t take responsibility if you burn your house down etc.) and hide the wires in the bottom portion. I then secured the socket in the top just with a very small screw in the gap between socket and holder.</p><p>For Wood I used Wenge, but you can use anything you want with around 3,5mm thickness. My wooden feet-strips are aroudn 11cm long, and I just shaped them with a handplane to fit in the dovetail in the holder. Glued in with a drop of CA glue.</p><p>looks a bit better and more fancy than the original, but I might be biased a bit here.</p>
With this file you will be able to print GU10 socket + Wood strips base for moon lamp lithophane with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on GU10 socket + Wood strips base for moon lamp lithophane.