Guide TPU Infitary i3

thingiverse

This is a step-by-step guide to using Infinite I3 printers to produce high-quality prints with Print TPU filament. TPU filament is known for its flexibility, durability and resistance to abrasion which makes it ideal for printing wearable items, smartphone cases, or other products that need to withstand impact or bending. Before starting to print with TPU filament on your Infinite I3 printer, make sure you have the following supplies: - Print TPU filament - A well-calibrated printer - A heated bed - The recommended temperature for printing with TPU is between 250 and 260 degrees Celsius To load the TPU filament into the printer, follow these steps: 1. Remove any other spools of filament from the printer. 2. Locate the loading mechanism on your Infinite I3 printer. 3. Insert the end of the Print TPU filament into the mechanism. 4. Gently pull the filament through the printer until it is fully loaded. The ideal print settings for using TPU filament with the Infinite I3 are as follows: - Layer height: 0.2 mm - Temperature: Between 250 and 260 degrees Celsius - Print speed: Moderate to slow To ensure successful prints, make sure your heated bed is at the right temperature before starting the print job. You can also use a brim or raft to help with adhesion. When printing with TPU filament, it's not uncommon for the filament to start to curl up as it cools down. To prevent this from happening, you can try using a cooling fan on your printer or adjusting the temperature settings. After completing a print job with Print TPU filament, remove the printed object from the printer and let it cool completely before handling it. This will help prevent any damage to the object caused by heat. By following these steps and using the recommended print settings, you should be able to produce high-quality prints with your Infinite I3 printer and Print TPU filament.