H0 train accessories kit - for Märklin C-Track

thingiverse

This is a playset modified to fit H0 C-track from Märklin, remixed from the following things: https://www.thingiverse.com/thing:2434150 https://www.thingiverse.com/thing:2102723 https://www.thingiverse.com/thing:3220846 The railroad crossing is large enough so that Playmobil cars and trucks can cross it. I added a 90° to the post on one side, to ensure the barrier goes straight up and makes way for higher trucks. The barrier is much longer than in the Brio set and I designed some slip-on elements, which I printed in red and white. Just play a bit with the scale to make them fit the barrier. I printer at 101% and glued them on the barrier. Make sure they are in the right position, otherwise they won`t fit in the post when coming down! I put a tiny self-cutting screw in the post and a tiny 3x3x3mm neodymium magnet in the barrier. When in the up position the magnet hits the screw and the barrier is fixed. The train station is almost unchanged. I just modified the base plate so it holds a Märklin H0 C-track and put a name on the roof. I just uploaded the base plat. The rest you need to get from the original file (link above). For the tunnel, I got rid of the Brio track and just scaled it was high enough and with enough for the train. I ensured 5mm space to the top and the sides. Do not forget to account for the height of the track! Then I added a hole on top to put a screw insert in there (or a plain stick) so a flag post can be mounted up there... I used a M4 insert and put a M4 screw at the end of the flag post. To complete the set, I used these signs, but I stretched them a bit in height when scaling for printing... https://www.thingiverse.com/thing:569291