Hammer Pegboard Holder

thingiverse

Hammer holder for pegboard. I got tired of the normal hammer holders and not having direct access to a hammer (when you stack them) so I came up with this. I made it modular sp print as many as you have hammers for. I designed it to not require support. Print the triangle face down. I tried to make the screws where they would self tap. It works, but it will melt the PLA due to friction. So I ended up taking a tap and tapping the pegboard itself. I also tried putting some gun oil on the screw and then letting it self tap. That actually worked fairly well if you don't have access to a M8 x 1.25 tap. May try making the screws out of PETG or ABS. Of course you can always use a traditional screw, but you will likely have to cut it down. 5/16in bolt will work nicely. I just like how it looks with a flush mounted printed screw. One of my biggest constraints I gave myself is only wanting to take up no more than 2 inches (pegboard holes) in the horizontal direction. So some larger hammers might not work as well. Just play with it and put the bigger mallets on the ends. Print the screws at .15 layer and 100% infill Print the holder at .2 Layer and 15% infill Note, I used PLA